To read the measured data from the BC-601 you need a SD-Card Reader at your PC. While the following dialogue opens the SD-Card is automatically sought and its content displayed. The user information are saved on the card with the according measured data (up to 4 users). The actual GMON user is searched and chosen by his birthday and gender on the card. In case the user does not exist on the card and there is still an unused user, it will be automatically asked, if the actual GMON user is to be installed on the card. Please read about the set up of body type and activity in the manual of the scale.
In the lower part of the dialogue you see the available measured data of the chosen user. The new measures are automatically marked. By pressing the button [Accept marked measures] the data are copied into the GMON database. This button is only enabled, when birthday and gender of the chosen user are identical with the GMON user and the measures have the status "OK".
You can delete a single user from the card with pressing a combination of buttons on the BC-601. (from the BC-601 manual p.4: In order to delete personal data, press [SET] and choose a number with [^] [v], then press and hold [SET]. The display will show CLr. Choose YES or no with [^] [v] and press [SET] to confirm.) Or you delete the measured data of a user with the button [Delete data] - see dialogue above - an overwrite the user data with [Change User].
To read the data manually from the scale and to write them into the GMON, press the button [Manual Input].
Tip: There is an „Quick Start Manual" for newcomers of the BC-601 as help file on the login screen of the GMON or in the Internet: www.gmon.info/download/FastStartBC601en.pdf.